2024 LiuGong Large Wheel Loaders 890H
- Year 2024
- Make LiuGong
- Model Large Wheel Loaders
- Engine Model: QSG12
2024 LiuGong Large Wheel Loaders 890H
LOWER YOUR TOTAL COST OF OWNERSHIPEnvironmental as well as economic awareness lie at the heart of our new 890H. Powered by the latest fuel efficient Cummins engine, it has a net power rating of 262 kW (351 hp) @ 1,800 rpm and fully complies with EPA Tier 4 final emission standards without compromising on power or performance.
Features may include:
Power Without Waste- Environmental as well as economic awareness lie at the heart of our new 890H. Powered by the latest fuel efficient Cummins engine, it has a net power rating of 262 kW (351 hp) @ 1,800 rpm and fully complies with EPA Tier IV final emission standards without compromising on power or performance. For operational efficiency, the engine uses a precise fuel injection system, turbo charger and air- to-air intercooler, along with electronic engine controls to deliver optimal performance in every cycle in every shift.
- We believe in making life easy on the operator which is why we've positioned the kick-down and forward/reverse buttons on the joystick. The kick-down function gives the operator finger-tip control enabling him to lower the gear, increase engine torque and maximize bucket breakout force with the minimum effort.
- Easily accessible service points make daily checks fast and effective. Easily visible hydraulic oil level gauge, ground accessible filters, easy to reach electronic control box and easy to replace A/C filter.
- The 890H’s value is critical to your business - heavyweight credibility and support are two key wheel loader purchasing criteria but ultimately, the machines earning potential, it's overall cost and its trade-in value really matter too.
Engine
Emissions
Regulation: Tier 4 Final / Stage IV
Engine Manufacturer
Cummins
Engine
Model: QSG12
Engine Power
Max gross: 370 hp (276 kW) @ 2,100 rpm | Max net: 352 hp (262 kW) @ 2,100 rpm
Engine Torque, Maximum
Peak: 1,248 lb-ft (1,693 N-m) @ 1,400 rpm
Displacement
720 in3 (11.8 L)
Cylinder Liners
6
Aspiration
Turbocharged & air-to-air intercooled
Drivetrain
Transmission
Type: Countershaft, power shift | Torque converter: Single-stage, three-element | Maximum travel speed, fwd: 23.7 mph (38.1 km/h) | Maximum travel speed, rev: 16.5 mph (26.5 km/h) | Number of speeds, fwd: 4 | Number of speeds, rev: 3
Differential, Front
Hydraulic lock
Differential, Rear
Conventional
Steering
Configuration: Articulated
Brakes
Brake System Type
Type: Wet discs, two independent circuits | Actuation: Hydraulic
Parking Brake
Type: Mechanical control | Actuation: Hydraulic
Wheels & Tires
Tires, Front Specification
Width over tires: 10 ft 5 in (3,170 mm) | 29.5R25 L3 tire
Tires, Rear Specification
Width over tires: 10 ft 5 in (3,170 mm) | 29.5R25 L3 tire
Operational
Operating Conditions
Bucket breakout force: 55,078 lbf (245 kN)
Hydraulics
Maximum Pressure
Steering pressure: 3,002 psi (20.7 MPa) | System pressure: 3,771 psi (26 MPa)
Pump Type
Piston
Hydraulic Type
Raise: 6.0 s | Dump time: 1.6 s | Float down time: 3.4 s | Total cycle time: 11.0 s
Dimensions
Dimensions
Axle oscillation: ±11° | Bucket rollback at ground level: 45° | Bucket rollback at carry: 49° | Turn angle, either side: 38° | Rear angle of departure: 25°
Height
Maximum hinge pin height: 15 ft 0 in (4,572 mm) | Dump clearance at full height discharge: 10 ft 11 in (3,330 mm) | Dump reach at full height discharge: 4 ft 10 in (1,479 mm) | Bucket rollback at maximum height: 62° | Maximum dump angle at full height: 45° | Cab height: 12 ft 4 in (3,765 mm)
Depth, Maximum
Maximum digging depth, bucket level: 6 in (142 mm)
Ground Clearance
18 in (476 mm)
Wheelbase
12 ft 2 in (3,700 mm)
Wheels
Wheel tread: 7 ft 11 in (2,420 mm)
Length
With bucket down: 30 ft 8 in (9,352 mm)
Turning Radius
bucket carry: 25 ft 4 in (7,725 mm)
Outside Turning Radius
of tire: 23 ft 0 in (7,011 mm)
Width
over bucket: 11 ft 4 in (3,440 mm)
Capacities
Cargo Capacity
Bucket capacity: 7.1 yd3 (5.5 m3 )
Load Capacity, Land
Tipping load - straight: 52,642 lb (23,878 kg) | Tipping load - full turn: 45,415 lb (20,600 kg)
Fuel Capacity
Tank: 128.1 gal (485 L) | Transmission: 13.2 gal (50 L) | DEF tank: 13.2 gal (50 L)
Oil capacity
9.2 gal (35 L)
Cooling System
11.8 gal (45 L)
Hydraulic Capacity
67.3 gal (255 L)
Axle Capacity, Front
Axles, each: 17.1 gal (65 L)
Axle Capacity, Rear
Axles, each: 17.1 gal (65 L)
Weights
Weight, In Running Order
Operating: 68,540 lb (31,089 kg)