2024 LiuGong Compact Excavators 9018F
- Year 2024
- Make LiuGong
- Model Compact Excavators
- Engine Model: 3TNV80F
2024 LiuGong Compact Excavators 9018F
2024 LiuGong Compact Excavators 9018F
TALK ABOUT A GOOD FITThe 9018F’s compact stature, combined with a retractable undercarriage, allows operators to easily pass through narrow entryways. 51-inch outside-tread-to-outside tread measurement retracts to just 39 inches when needed and then expands back out for balance and stabilization during operation.
Features may include:
Power Without Waste- The new 9018F Excavator is powered by the latest fuel efficient Yanmar 3TNV80F engine, it has a net power rating of 13.4 kW (18 hp) and fully complies with Tier IV Final emission standards without compromising on power or performance. The refined combustion process assures precise fuel delivery and control. The result is reduced emissions, improved performance over a wide range of application and increased fuel economy.
- The new 9018F Excavator provides an operator platform geared to get more work done with creature comforts that make those 12 hour days a breeze. Ergonomic controls and excellent all-around visibility, the platform enables full control of the operator station.
- When it’s time to perform the standard daily maintenance checks, the new 9018F Excavator makes access to critical areas easy on the operator.
- The 9018F’s design is built for operating in those hard to maneuver locales like congested roadways, near commercial buildings and residences and anywhere obstacles can impede work.
Engine
Emissions
Rating: EPA Tier 4 Final
Engine Manufacturer
Yanmar
Engine
Model: 3TNV80F
Aspiration
Natural
Cooling
Fan drive: Direct
Displacement
77.5 in³ (1.3 L)
Engine Power
Gross: 18.2 hp (13.4 kW) @ 2,200 rpm | Net: 17.1 hp (12.6 kW) @ 2,200 rpm
Engine Torque, Maximum
Peak torque 48.2 lb·ft (65.3 N·m) 1,600 rpm
Cylinder Liners
3
Bore
3.1 in (80 mm)
Stroke
3.3 in (84 mm)
Drivetrain
Gears
Swing System: Planetary gear reduction driven by high torque axial piston motor, with oil disk brake.
Brakes
Parking Brake
Swing System: Swing parking brake resets within five seconds after swing pilot controls return to neutral.
Battery
Battery
12V (one)
Electric
Electrical
System voltage: 12V
Alternator
12V - 40A
Electric Start
12V - 1.9 hp (12V - 1.4 kW )
Operational
Operating Conditions
Swing torque: 1,563 lbf (2,119 N·m) | Gradeability: 30° / 58% | Max. drawbar pull: 3,597 lb·ft (16 kN)
Operating Speed
Swing: 9.5 rpm | Travel speed High: 2.8 mph (4.5 km/h) | Travel speed Low: 1.7 mph (2.7 km/h)
Performance
Noise Level
Interior sound level (ISO 6396): 78 dB(A) | Exterior sound level (ISO 6395): 90 dB(A)
Hydraulics
Hydraulic Type
Load-sensing variable piston pump
Hydraulic Flow
Maximum: 15 gal/min (55 L/min)
Relief Valve Setting
Implement: 3,046 psi (21 MPa) | Travel circuit: 3,046 psi (21 MPa) | Slew circuit: 1,914 psi (13.2 MPa) | Pilot circuit: 566 psi (3.9 MPa)
Dimensions
Bore
Boom Cylinder: 2.4 in (60 mm) | Arm Cylinder: 2.4 in (60 mm) | Bucket Cylinder: 2.4 in (60 mm)
Stroke
Boom Cylinder: 18 in (462 mm) | Arm Cylinder: 14 in (365 mm) | Bucket Cylinder: 11 in (295 mm)
Dimensions
Rubber track assembly: 9 in (230 mm)
Depth, Maximum
Maximum Digging Depth: 8 ft 0 in (2,430 mm)
Capacities
Fuel Capacity
Tank: 7.4 gal (28 L)
Oil capacity
1.2 gal (4.4 L)
Cooling System
0.9 gal (3.3 L)
Hydraulic Capacity
Reservoir: 6.3 gal (24 L)
Cargo Capacity
Bucket Capacity: 0.06 yd3 (0.045 m3)
Weights
Weight, In Running Order
Operating: 4,189 - 3,969 lb (1,900 - 1,800 kg)
Features
Features
Bottom rollers each side: 3