2024 LiuGong Compact Excavators 9018F

2024 LiuGong Compact Excavators 9018F

Swipe to View More

  • Year 2024
  • Make LiuGong
  • Model Compact Excavators
  • Engine Model: 3TNV80F
2024 LiuGong Compact Excavators 9018F

2024 LiuGong Compact Excavators 9018F

2024 LiuGong Compact Excavators 9018F

TALK ABOUT A GOOD FIT

The 9018F’s compact stature, combined with a retractable undercarriage, allows operators to easily pass through narrow entryways. 51-inch outside-tread-to-outside tread measurement retracts to just 39 inches when needed and then expands back out for balance and stabilization during operation.

Features may include:

Power Without Waste
  • The new 9018F Excavator is powered by the latest fuel efficient Yanmar 3TNV80F engine, it has a net power rating of 13.4 kW (18 hp) and fully complies with Tier IV Final emission standards without compromising on power or performance. The refined combustion process assures precise fuel delivery and control. The result is reduced emissions, improved performance over a wide range of application and increased fuel economy.
Ultimate Comfort
  • The new 9018F Excavator provides an operator platform geared to get more work done with creature comforts that make those 12 hour days a breeze. Ergonomic controls and excellent all-around visibility, the platform enables full control of the operator station.
Ease Of Use
  • When it’s time to perform the standard daily maintenance checks, the new 9018F Excavator makes access to critical areas easy on the operator.
Short Tailswing
  • The 9018F’s design is built for operating in those hard to maneuver locales like congested roadways, near commercial buildings and residences and anywhere obstacles can impede work.

Engine

Emissions Rating: EPA Tier 4 Final
Engine Manufacturer Yanmar
Engine Model: 3TNV80F
Aspiration Natural
Cooling Fan drive: Direct
Displacement 77.5 in³ (1.3 L)
Engine Power Gross: 18.2 hp (13.4 kW) @ 2,200 rpm | Net: 17.1 hp (12.6 kW) @ 2,200 rpm
Engine Torque, Maximum Peak torque 48.2 lb·ft (65.3 N·m) 1,600 rpm
Cylinder Liners 3
Bore 3.1 in (80 mm)
Stroke 3.3 in (84 mm)

Drivetrain

Gears Swing System: Planetary gear reduction driven by high torque axial piston motor, with oil disk brake.

Brakes

Parking Brake Swing System: Swing parking brake resets within five seconds after swing pilot controls return to neutral.

Battery

Battery 12V (one)

Electric

Electrical System voltage: 12V
Alternator 12V - 40A
Electric Start 12V - 1.9 hp (12V - 1.4 kW )

Operational

Operating Conditions Swing torque: 1,563 lbf (2,119 N·m) | Gradeability: 30° / 58% | Max. drawbar pull: 3,597 lb·ft (16 kN)
Operating Speed Swing: 9.5 rpm | Travel speed High: 2.8 mph (4.5 km/h) | Travel speed Low: 1.7 mph (2.7 km/h)

Performance

Noise Level Interior sound level (ISO 6396): 78 dB(A) | Exterior sound level (ISO 6395): 90 dB(A)

Hydraulics

Hydraulic Type Load-sensing variable piston pump
Hydraulic Flow Maximum: 15 gal/min (55 L/min)
Relief Valve Setting Implement: 3,046 psi (21 MPa) | Travel circuit: 3,046 psi (21 MPa) | Slew circuit: 1,914 psi (13.2 MPa) | Pilot circuit: 566 psi (3.9 MPa)

Dimensions

Bore Boom Cylinder: 2.4 in (60 mm) | Arm Cylinder: 2.4 in (60 mm) | Bucket Cylinder: 2.4 in (60 mm)
Stroke Boom Cylinder: 18 in (462 mm) | Arm Cylinder: 14 in (365 mm) | Bucket Cylinder: 11 in (295 mm)
Dimensions Rubber track assembly: 9 in (230 mm)
Depth, Maximum Maximum Digging Depth: 8 ft 0 in (2,430 mm)

Capacities

Fuel Capacity Tank: 7.4 gal (28 L)
Oil capacity 1.2 gal (4.4 L)
Cooling System 0.9 gal (3.3 L)
Hydraulic Capacity Reservoir: 6.3 gal (24 L)
Cargo Capacity Bucket Capacity: 0.06 yd3 (0.045 m3)

Weights

Weight, In Running Order Operating: 4,189 - 3,969 lb (1,900 - 1,800 kg)

Features

Features Bottom rollers each side: 3

Product Photography