2024 LiuGong Large Wheel Loaders 890H

Information

2024 LiuGong Large Wheel Loaders 890H

LOWER YOUR TOTAL COST OF OWNERSHIP

Environmental as well as economic awareness lie at the heart of our new 890H. Powered by the latest fuel efficient Cummins engine, it has a net power rating of 262 kW (351 hp) @ 1,800 rpm and fully complies with EPA Tier 4 final emission standards without compromising on power or performance.

Features may include:

Power Without Waste
  • Environmental as well as economic awareness lie at the heart of our new 890H. Powered by the latest fuel efficient Cummins engine, it has a net power rating of 262 kW (351 hp) @ 1,800 rpm and fully complies with EPA Tier IV final emission standards without compromising on power or performance. For operational efficiency, the engine uses a precise fuel injection system, turbo charger and air- to-air intercooler, along with electronic engine controls to deliver optimal performance in every cycle in every shift.
Control In The Operators Hands
  • We believe in making life easy on the operator which is why we've positioned the kick-down and forward/reverse buttons on the joystick. The kick-down function gives the operator finger-tip control enabling him to lower the gear, increase engine torque and maximize bucket breakout force with the minimum effort.
Easy Access Check Points
  • Easily accessible service points make daily checks fast and effective. Easily visible hydraulic oil level gauge, ground accessible filters, easy to reach electronic control box and easy to replace A/C filter.
Total Cost Of Ownership
  • The 890H’s value is critical to your business - heavyweight credibility and support are two key wheel loader purchasing criteria but ultimately, the machines earning potential, it's overall cost and its trade-in value really matter too.

Photos

Highlights

  • Odessa, Texas
  • 2024
  • LiuGong
  • Large Wheel Loaders 890H
  • Model: QSG12
  • Type: Countershaft, power shift | Torque converter: Single-stage, three-element | Maximum travel speed, fwd: 23.7 mph (38.1 km/h) | Maximum travel speed, rev: 16.5 mph (26.5 km/h) | Number of speeds, fwd: 4 | Number of speeds, rev: 3
  • Available
  • over bucket: 11 ft 4 in (3,440 mm)
  • Maximum hinge pin height: 15 ft 0 in (4,572 mm) | Dump clearance at full height discharge: 10 ft 11 in (3,330 mm) | Dump reach at full height discharge: 4 ft 10 in (1,479 mm) | Bucket rollback at maximum height: 62° | Maximum dump angle at full height: 45° | Cab height: 12 ft 4 in (3,765 mm)

Specifications

  • 2024
  • LiuGong
  • Large Wheel Loaders
  • 890H
  • Large
  • Model: QSG12
  • Regulation: Tier 4 Final / Stage IV
  • Cummins
  • Max gross: 370 hp (276 kW) @ 2,100 rpm | Max net: 352 hp (262 kW) @ 2,100 rpm
  • Peak: 1,248 lb-ft (1,693 N-m) @ 1,400 rpm
  • 720 in3 (11.8 L)
  • 6
  • Turbocharged & air-to-air intercooled
  • Type: Countershaft, power shift | Torque converter: Single-stage, three-element | Maximum travel speed, fwd: 23.7 mph (38.1 km/h) | Maximum travel speed, rev: 16.5 mph (26.5 km/h) | Number of speeds, fwd: 4 | Number of speeds, rev: 3
  • Hydraulic lock
  • Conventional
  • Configuration: Articulated
  • Type: Wet discs, two independent circuits | Actuation: Hydraulic
  • Type: Mechanical control | Actuation: Hydraulic
  • Width over tires: 10 ft 5 in (3,170 mm) | 29.5R25 L3 tire
  • Width over tires: 10 ft 5 in (3,170 mm) | 29.5R25 L3 tire
  • Bucket breakout force: 55,078 lbf (245 kN)
  • Steering pressure: 3,002 psi (20.7 MPa) | System pressure: 3,771 psi (26 MPa)
  • Piston
  • Raise: 6.0 s | Dump time: 1.6 s | Float down time: 3.4 s | Total cycle time: 11.0 s
  • Axle oscillation: ±11° | Bucket rollback at ground level: 45° | Bucket rollback at carry: 49° | Turn angle, either side: 38° | Rear angle of departure: 25°
  • Maximum hinge pin height: 15 ft 0 in (4,572 mm) | Dump clearance at full height discharge: 10 ft 11 in (3,330 mm) | Dump reach at full height discharge: 4 ft 10 in (1,479 mm) | Bucket rollback at maximum height: 62° | Maximum dump angle at full height: 45° | Cab height: 12 ft 4 in (3,765 mm)
  • Maximum digging depth, bucket level: 6 in (142 mm)
  • 18 in (476 mm)
  • 12 ft 2 in (3,700 mm)
  • Wheel tread: 7 ft 11 in (2,420 mm)
  • With bucket down: 30 ft 8 in (9,352 mm)
  • bucket carry: 25 ft 4 in (7,725 mm)
  • of tire: 23 ft 0 in (7,011 mm)
  • over bucket: 11 ft 4 in (3,440 mm)
  • Bucket capacity: 7.1 yd3 (5.5 m3 )
  • Tipping load - straight: 52,642 lb (23,878 kg) | Tipping load - full turn: 45,415 lb (20,600 kg)
  • Tank: 128.1 gal (485 L) | Transmission: 13.2 gal (50 L) | DEF tank: 13.2 gal (50 L)
  • 9.2 gal (35 L)
  • 11.8 gal (45 L)
  • 67.3 gal (255 L)
  • Axles, each: 17.1 gal (65 L)
  • Axles, each: 17.1 gal (65 L)
  • Operating: 68,540 lb (31,089 kg)