over tires 9 ft 5 in (2,880 mm) | over bucket 9 ft 9 in (2,970 mm)
Maximum hinge pin height 13 ft 8 in (4,156 mm) | Dump clearance at full height discharge 9 ft 9 in (2,977 mm) | Dump reach at full height discharge 4 ft 0 in (1,231 mm) | Bucket rollback at max. height 56.3° | Cab: 11 ft 6 in (3,500 mm)
Specifications
2024
LiuGong
Medium Wheel Loaders
856H-E MAX
Medium
LFP
CATL
Cooling method Intelligent temperature control, liquid cooling
Adaptive altitude =3.1 mi (5,000 m) | Cold cranking capacity at (-18o C) 850 A | Reserve capacity at (-44o F) 224 min | Bucket breakout force 36,419 lbf (162 kN)
Ambient temperature -40-185°F (-40-85°C)
Main pump type Variable displacement pump
Raise 5.2 s | Dump time 1.5 s | Float down time 2.3 s | Total cycle time 9.0 s
Bucket rollback at ground level 44.3° | 2 Bucket rollback at carry 49° | Turn angle, either side 38° | Rear angle of departure 28°
Maximum hinge pin height 13 ft 8 in (4,156 mm) | Dump clearance at full height discharge 9 ft 9 in (2,977 mm) | Dump reach at full height discharge 4 ft 0 in (1,231 mm) | Bucket rollback at max. height 56.3° | Cab: 11 ft 6 in (3,500 mm)
Max. digging depth, bucket level 2 in (50.2 mm) | Max. dump angle at full height 45°
1 ft 5 in (431 mm)
11 ft 7 in (3,525 mm)
tread 7 ft 6 in (2,280 mm)
over tires 9 ft 5 in (2,880 mm) | over bucket 9 ft 9 in (2,970 mm)
with bucket down 28 ft 3 in (8,615 mm)
bucket carry 23 ft 8 in (7,209 mm) | outside of tire 21 ft 9 in (6,625 mm)
Controls Electric proportional fingertip control | Number of speeds, fwd 2 | Number of speeds, rev 1 | Front and rear axle reduction ratio 23.3 | Axle oscillation ±9°
12 gal (45 L)
61 gal (230 L)
9 gal (35 L)
9 gal (35 L)
Tipping load - straight 38,360 lb (17,400 kg) | Tipping load - full turn 33,951 lb (15,400 kg)
