2024 LiuGong Compact Excavators 9027FZTS

Information

2024 LiuGong Compact Excavators 9027FZTS

ZERO TAIL SWING. IT’S IDEAL IF YOU WORK IN TIGHT SPACES.

The 9027FZTS was designed with a number of features to help operators. Zero tail swing, high level diagnostics, and two knobs to control auxiliary flow for precise operation, to help you get more done.

Features may include:

Power Without Waste
  • The new 9027 Excavator is powered by the latest fuel efficient Yanmar 3TNV80F engine, it has a net power rating of 20.4 kW (15.2 hp) and fully complies with Tier IV Final emission standards without compromising on power or performance. The refined combustion process assures precise fuel delivery and control. The result is reduced emissions, improved performance over a wide range of application and increased fuel economy.
Ultimate Comfort
  • The new 9027FZTS Excavator provides an operator platform geared to get more work done with creature comforts that make those 12 hour days a breeze. Ergonomic controls and excellent all-around visibility, the platform enables full control of the operator station.
Ease Of Use
  • When it's time to perform the standard daily maintenance checks, the new 9027 Excavator makes access to critical areas easy on the operator.
Short Tailswing
  • The 9027’s design is built for operating in those hard to maneuver locales like congested roadways, near commercial buildings and residences and anywhere obstacles can impede work.

Photos

Highlights

  • Odessa, Texas
  • 2024
  • LiuGong
  • Compact Excavators 9027FZTS
  • Model: 3TNV80F
  • Available

Specifications

  • 2024
  • LiuGong
  • Compact Excavators
  • 9027FZTS
  • Compact
  • Model: 3TNV80F
  • Rating: EPA Tier 4 Final - Stage V
  • Yanmar
  • Natural
  • Fan drive: Direct
  • 77.3 in³ (1.267 L)
  • Output: 20.4 hp (15.2 kW) @ 2,500 rpm
  • Peak: 49.6 lb·ft (67.3 N·m) 1,800 rpm
  • 3
  • Boom Cylinder: 2.7 in (70 mm) | Arm Cylinder: 2.7 in (70 mm) | Bucket Cylinder: 2.5 in (65 mm)
  • Boom Cylinder: 20.1 in (510 mm) | Arm Cylinder: 19 in (482 mm) | Bucket Cylinder: 15 in (382 mm)
  • Swing System: Planetary gear reduction driven by high torque axial piston motor, with oil disk brake.
  • Steering controlled by two detachable hand levers with pedals.
  • Swing System: Swing parking brake resets within five seconds after swing pilot controls return to neutral.
  • 2-speed axial piston motors with oil disk brakes.
  • 12V (one)
  • System voltage: 12V
  • 12V - 40A
  • 12V - 1.9 hp (12V - 1.4 kW )
  • Swing torque: 3,395 lbf·ft (4,600 N·m) | Gradeability: 30° / 58% | Max. drawbar pull: 5,530 lb·ft (24.6 kN)
  • Swing: 9.5 rpm | Travel speed High: 2.8 mph (4.5 km/h) | Travel speed Low: 1.7 mph (2.7 km/h)
  • Interior sound level (ISO 6396): 79 dB(A) | Exterior sound level (ISO 6395): 93 dB(A)
  • Load-sensing variable piston pump
  • Maximum: 22.8 gal/min (86.4 L/min)
  • Implement: 3,133 psi (21.6 MPa) | Travel circuit: 3,133 psi (21.6 MPa) | Slew circuit: 2,698 psi (18.6 MPa) | Pilot circuit: 566 psi (3.9 MPa)
  • Rubber track assembly: 12 in (300 mm)
  • Maximum Digging Depth: 9 ft 4 in (2,857 mm)
  • Tank: 7.1 gal (27 L)
  • 1.2 gal (4.4 L)
  • 1.3 gal (5 L)
  • Reservoir: 6.9 gal (26 L)
  • Bucket Capacity: 0.065 yd3 (0.05 m3)
  • Operating: 6,063 lb -5,908 lb (2,750 kg - 2,680 kg)
  • Bottom rollers each side: 3 | Top rollers each side: 1